Product ID:AMOCO LDO SG MOTOR OIL 10W-40
MSDS Date:10/02/1989
FSC:9150
NIIN:00-116-0506
MSDS Number: BKMWP

Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)

Info Phone: 312-856-3907

Cage: 15958

Telephone: 800 447-8735

Cage: 15958

REFINED HEAVY PARAFFINIC DISTILLATES (SOLVENT REFINED

CAS: 64741-88-4

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3;10 MG/M3STEL

LD50 LC50 Mixture:LD50:(ORL,RAT)5 G/KG; (DRM,RBT)2 G/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE/INHAL/INGEST:NO SIGNIFICANT
HEALTH HAZARDS IDENTIFIED. SKIN:NONE EXPECTED FOR SINGLE SHORT-TERM
EXPOSURES. PRLNGD/RPTD CONTACT MAY PRODUCE SOME IRRITATION.
CAUTION! CONTINUOUS LONG- TERM CON TACT W/USED MOTOR OILS HAS
CAUSED CANCER IN ANIMAL TESTS. (MFR.)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:NONE REQUIRED FOR UNUSED MOTOR OIL. CNTCT W/USED MOTOR OIL,
WASH AREA THOROUGHLY W/SOAP & WATER OR USE WATERLESS HAND CLEANERS.
DO NOT USE GAS OLINE, THINNERS OR SOLVENTS. INHAL:IF ADVERSE
EFFECTS OCCUR, REMOVE TO UNCONTAMINATED AREA. INGEST:IF LG AMT
SWALLOWED, INDUCE VOMITING. GET MD.

Flash Point Method:COC
Flash Point:401F,205C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G.,DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:CONTAIN ON ABSORBENT MATERIAL (E.G., SAND,
SAWDUST, DIRT, CLAY). KEEP OUT OF SEWERS AND WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:WEAR PROTECTIVE CLOTHING AND
IMPERVIOUS GLOVES WHEN WORKING W/USED MOTOR OILS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE REQUIRED; HOWEVER, USE OF ADEQUATE
VENTILATION IS GOOD INDUSTRIAL PRACTICE.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE OIL-SOAKED CLTHG, INCLUDING SHOES, &
THOROUGHLY CLEAN & DRY BEFORE RE-USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Spec Gravity:0.88
Solubility in Water:<0.1%.
Appearance and Odor:PALE COLORED OILY LIQUID.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE BURNING CAN PRODUCE CO
AND/OR CO2 AND OTHER HARMFUL PRODUCTS.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W APPLICABLE FEDERAL,
STATE, OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED INCINERATION IS
RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.